Relief Valve On-Vehicle Inspection (F9Q Engine Model); Tightening Torque Specifications - Suzuki Grand Vitara 2011 Manual

Installation
• Reverse removal procedure nothing the following
instructions.
• Do not reuse relief valve O-ring (1).
• Apply compressor oil to O-ring (1) and install O-ring
(1) to relief valve (2).
• Tighten relief valve (2) to specified torque.
Tightening torque
Relief valve (a): 9 N·m (0.9 kgf-m, 6.5 lb-ft)

Tightening Torque Specifications

Fastening part
Refrigerant line bolt
A/C refrigerant pressure sensor
A/C refrigerant pressure sensor
Compressor mounting bolt for M16 engine
model
Compressor mounting bolt for J20 engine model
Compressor mounting bolt
Magnet clutch coil bolt
Armature plate bolt
Armature plate bolt
Relief valve
NOTE
The specified tightening torque is also described in the following.
"Compressor Assembly and Compressor Bracket Components (F9Q Engine Model)"
"Magnet Clutch Components for M16 Engine Model"
"Magnet Clutch Components for J20 Engine Model"
"Magnet Clutch Components (F9Q Engine Model)"
Reference:
For the tightening torque of fastener not specified in this section, refer to "Fastener Information in Section 0A".
Relief Valve On-Vehicle Inspection (F9Q Engine
Model)
Using special tool (A), check is there is refrigerant
leakage.
If there is refrigerant leakage, replace compressor body.
Special tool
(A): 09990–86012
1
2, (a)
I5JB0A720085-02
Specifications
Tightening torque
N⋅m
12
11
9
25
25
25
4.9
15
21
9
Air Conditioning System:
1
1. Checking point
kgf-m lb-ft
1.2 9.0
1.1 8.0
0.9 6.5
2.5 18.0
2.5 18.0
2.5 18.0
0.49 4.0
1.5 11.0
2.1 15.5
0.9 6.5
7B-96
S6JB0A7206053
(A)
I6JB0A720013-01
S6JB0A7207001
Note
(petrol engine model)
(diesel engine model)
/