Scan Tool Data Definitions - Suzuki Grand Vitara 2011 Manual

Scan Tool Data
Transfer switch selected to N position
Mode switch 1
Transfer switch selected to 4H, 4H-lock or 4L-lock position
Transfer switch selected to 4H, 4H-lock or N position
Mode switch 2
Transfer switch selected to 4L-lock position
Transfer switch selected to 4H-lock or 4L-lock position
Mode switch 3
Transfer switch selected to 4H or N position
Buzzer not being sound
Transfer shifted to N Position
Warning buzzer
Transfer shifted to disagreement of transfer switch and transfer
position
ABS operating
ABS active
ABS not operating
ESP® operating
ESP® active
ESP® not operating

Scan Tool Data Definitions

Vehicle Speed (KM/H, MPH):
This parameter indicates vehicle speed calculated by 4WD control module.
Actuator Pos Sen (Transfer shift actuator motor position switch) (4H / 4H-lock / 4L-lock / N / 4H-lock-4H / 4H-N
/ N-4L-lock):
This parameter indicates transfer shift actuator motor position switch status detected by 4WD control module.
Actuator motor Pos (Transfer shift actuator motor position) (4H / 4H-lock / 4L-lock / N):
This parameter indicates transfer shift actuator motor position detected by 4WD control module using transfer shift
actuator motor position.
Battery voltage (V):
This parameter indicates battery voltage detected by 4WD control module.
4L / N switch (ON / OFF):
This parameter indicates 4L / N switch status detected by 4WD control module.
Center diff lock Sw (ON / OFF):
This parameter indicates center differential lock switch status detected by 4WD control module.
N range signal (AT) (ON / OFF):
This parameter indicates A/T shift position ("N" range or not) detected by 4WD control module.
CPP switch (Clutch pedal position switch) (MT) (ON / OFF):
This parameter indicates clutch pedal position switch status detected by 4WD control module using CPP switch.
Mode switch 1 (Transfer switch) (ON / OFF):
ON: Transfer switch to N position.
OFF: Transfer switch to other than N position.
Mode switch 2 (Transfer switch) (ON / OFF):
ON: Transfer switch to other than 4L-lock position.
OFF: Transfer switch to 4L-lock position.
Mode switch 3 (Transfer switch) (ON / OFF):
ON: Transfer switch to 4H-lock or 4L-lock position.
OFF: Transfer switch to 4H or N position.
Warning buzzer (OFF / N Pos / Error):
This parameter indicates if buzzer is being commanded by 4WD control module.
ABS active (ON / OFF):
This parameter indicates ABS status detected by 4WD control module.
ESP® active (ON / OFF):
This parameter indicates ESP® status detected by 4WD control module.
Transfer: Motor-Shift Type (Transfer with Shift Actuator) 3C-24
Vehicle Condition
Normal Condition /
Reference Value
ON
OFF
ON
OFF
ON
OFF
OFF
N Pos
Error
ON
OFF
ON
OFF
S6JB0A3314010