Suzuki Grand Vitara 2011 Manual page 1004

3C-19 Transfer: Motor-Shift Type (Transfer with Shift Actuator)
1) Inspect shift operation from 4H to 4H-lock as follows.
a) Start engine.
b) Position front wheels straight ahead.
c) Confirm that vehicle is under following
conditions.
• Transfer shift position is 4H.
• Vehicle speed is less than 100 km/h (60 mph).
d) Turn transfer switch to "4H-lock" position.
e) Check that differential lock indicator blinks, and
then comes ON steady.
2) Inspect shift operation from 4H-lock to 4L-lock as
follows.
a) Stop vehicle completely with engine running.
b) Position front wheels straight ahead.
c) Confirm that vehicle is under following
conditions.
• Transfer shift position is 4H-lock.
• Transmission shift lever is at "N" position. (for
A/T model)
• Clutch pedal is depressed fully. (for M/T
model)
• Brake pedal is depressed.
d) Push and turn transfer switch to "4L-lock"
position.
e) Check that 4L indicator blink, and then
differential lock indicator and 4L indicator comes
ON steady.
3) Inspect shift operation from 4L-lock to 4H-lock as
follows.
a) Stop vehicle completely with engine running.
b) Position front wheels straight ahead.
c) Confirm that vehicle is under following
conditions.
• Transfer shift position is 4L-lock.
• Transmission shift lever is at "N" position. (for
A/T model)
• Clutch pedal is depressed fully. (for M/T
model)
• Brake pedal is depressed.
d) Push and turn transfer switch to "4H-lock"
position.
e) Check that 4L indicator blink, and then
differential lock indicator comes ON steady and
4L indicator not come ON.
4) Inspect shift operation from 4H-lock to 4H as follows.
a) Start engine.
b) Position front wheels straight ahead.
c) Confirm that vehicle is under following
conditions.
• Transfer shift position is 4H-lock.
• Vehicle speed is less than 100 km/h (60 mph).
d) Turn transfer switch to "4H" position.
e) Check that differential lock indicator blinks, and
then not comes ON.
5) Inspect shift operation from 4H to N as follows.
a) Stop vehicle completely with engine running.
b) Position front wheels straight ahead.
c) Confirm that vehicle is under following
conditions.
• Transfer shift position is 4H.
• Transmission shift lever is at "N" position. (for
A/T model)
• Clutch pedal is depressed fully. (for M/T
model)
• Brake pedal is depressed.
d) Turn transfer switch to " " position (1), keep it
there for about 10 seconds, and then turn it to
"N" position after N indicator blinks.
1
e) Check that N indicator blinks and warning buzzer
sounds, and then N indicator comes ON steady.
I5JB0A332002-01