Water Pump Inspection; Specifications; Tightening Torque Specifications; Special Tools And Equipment - Suzuki Grand Vitara 2011 Manual

Installation
1) Remove oil and dust from sealing surface of cylinder
block and water pump.
2) Apply sealant to three bolts (1).
"A": Thread lock cement (Loctite
FRENETANCH®)
3) Install water pump assembly (2) with new gasket.
Tightening torque
Water pump assembly bolt (a): 10 N·m (1.0 kgf-
m, 7.5 lb-ft)

Tightening Torque Specifications

Fastening part
Thermostat bolt
Water pump assembly bolt
Reference:
For the tightening torque of fastener not specified in this section, refer to "Fastener Information in Section 0A".

Recommended Service Material

Material
Thread lock cement
I5JB0B160008-01
I5JB0B160009-01

Specifications

Special Tools and Equipment

SUZUKI recommended product or Specification
Loctite FRENETANCH®
Engine Cooling System: For Diesel Engine Model 1F-24
4) Install timing belt referring to "Timing Belt and Belt
Tensioner Removal and Installation: For F9Q Engine
in Section 1D".
5) Refill coolant referring to "Cooling System Refilling:
For Diesel Engine Model".

Water Pump Inspection

CAUTION
!
Do not disassemble water pump.
If any repair is required on pump, replace it
as assembly.
Rotate water pump by hand to check for smooth
operation. If pump does not rotate smoothly or makes
abnormal noise, replace it.
Tightening torque
N⋅m kgf-m
8 0.8
10 1.0
—
S6JB0A1626017
I5JB0B160011-01
S6JB0A1627001
Note
lb-ft
6.0
7.5
S6JB0A1628001
Note