1G-49 Fuel System: For Diesel Engine Model
3) Hoist vehicle, and remove clamp (2) and fuel filler
hose (1) from fuel filler neck.
2
4) Remove fuel tank inlet valve (1) using flat head rod
(2) or the like.
CAUTION
!
Be careful not to damage fuel tank inlet valve
(1) with flat head rod (2) or the like.
Installation
1) Install fuel tank inlet valve (1) to fuel tank.
2) Install fuel filler hose (1) to fuel tank and secure it
with clamp (2).
For proper installation, refer to "Fuel Hose
Disconnecting and Reconnecting: For Diesel Engine
Model".
2
1
I5JB0A171014-01
I2RH0B170017-01
I2RH0B170018-01
1
I5JB0A171014-01
3) Lower vehicle and install fuel filler cap.
Fuel Tank Inlet Valve Inspection
Check fuel tank inlet valve for the following.
If any damage or malfunction is found, replace.
• Damage
• Smooth opening and closing
Fuel Pump Assembly Removal and Installation
WARNING
!
Before servicing fuel system, be sure to
observe "Precautions on Fuel System
Service: For Diesel Engine Model".
Removal
1) Remove fuel tank from vehicle. Refer to "Fuel Tank
Removal and Installation: For Diesel Engine Model".
2) Disconnect fuel feed pipe (1) and fuel return pipe (3)
from fuel pump assembly (2) referring to "Fuel Hose
Disconnecting and Reconnecting: For Diesel Engine
Model".
2
3) Remove fuel pump assembly (1) from fuel tank (2)
and disconnect suction hose.
S6JB0A1726016
I2RH0B170019-01
S6JB0A1726019
3
1
I5JB0A171024-01
1
2
I3RM0A170021-01