Suzuki Grand Vitara 2011 Manual page 549

5) Using scale (1) on gauging plastic (2), check bearing
clearance with newly selected standard bearing.
If clearance still exceeds its limit, use next thicker
bearing and recheck clearance.
Undersize bearing (0.25 mm (0.0098 in.))
• 0.25 mm (0.0098 in.) undersize bearing is available, in five kinds varying in thickness.
To distinguish them, each bearing is painted in the following colors at such position as indicated in the figure.
Each color represents the following thickness at the center of bearing.
Undersize of crankshaft main bearing thickness
Color painted
Red and Purple
Red and Brown
Red and Green
Red and Black
Red only
I2RH0B140141-01
Bearing thickness
2.117 – 2.121 mm (0.08335 – 0.08350 in.)
2.120 – 2.124 mm (0.08347 – 0.08362 in.)
2.123 – 2.127 mm (0.08359 – 0.08374 in.)
2.126 – 2.130 mm (0.08371 – 0.08385 in.)
2.129 – 2.133 mm (0.08382 – 0.08397 in.)
Engine Mechanical: For M16A Engine with VVT 1D-59
6) When replacing crankshaft or cylinder block due to
any reason, select new standard bearings to be
installed by referring to number stamped on new
crankshaft or alphabets stamped on new cylinder
block.
I2RH01140192-01
1. Paint