Radiator Cooling Fan Assembly Removal And Installation; Radiator On-Vehicle Inspection And Cleaning; Radiator Removal And Installation - Suzuki Grand Vitara 2011 Manual

1F-11 Engine Cooling System: For Petrol Engine Model
Radiator Cooling Fan Assembly Removal and
Installation
Removal
1) Disconnect negative (–) cable at battery.
2) Disconnect connectors (1) of cooling fan motors.
1
3) With hose connected, detach P/S fluid reservoir with
reservoir bracket.
4) Remove air cleaner case and air cleaner suction
pipe (2).
5) Remove reservoir (1) from radiator.
6) Remove cooling fan assembly.
Installation
Reverse removal procedure for installation noting the
following.
• Refill cooling system referring to Step 7) to 17) of
"Cooling System Flush and Refill: For Petrol Engine
Model".
• After installation, verify there is no coolant leakage at
each connection.
S6JB0A1616012
I5JB0A161014-01
1
2
I5JB0A161015-01

Radiator On-Vehicle Inspection and Cleaning

Inspection
Check radiator for leakage or damage. Straighten bent
fins, if any.
Cleaning
Clean frontal area of radiator cores.

Radiator Removal and Installation

Removal
1) Disconnect negative cable at battery.
2) For A/T, drain A/T fluid referring to "A/T Fluid Change
in Section 5A".
3) Drain coolant.
4) Remove cooling fan assembly referring to "Radiator
Cooling Fan Assembly Removal and Installation: For
Petrol Engine Model".
5) For A/T, remove A/T fluid cooler inlet and outlet
hoses.
6) Remove radiator outlet hose from radiator.
7) Remove condenser bolts from condenser brackets.
8) Remove radiator from vehicle.
Installation
Reverse removal procedures, noting the following.
• Refill cooling system referring to Step 7) to 17) of
"Cooling System Flush and Refill: For Petrol Engine
Model".
• After installation, verify there is no coolant leakage
each connection.
• Refill A/T fluid referring to "A/T Fluid Change in
Section 5A".
S6JB0A1616013
I2RH01160014-01
S6JB0A1616014