Snmp-Server Tcp-Session - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 21 S Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

snmp-server tcp-session

To enable one time authentication for SNMP over a TCP session, use the snmp-server tcp-session
command in configuration mode. To disable one time authentication for SNMP over a TCP session, use
the no form of the command.
Syntax Description
auth
Command Default
One time authentication for SNMP over a TCP session is on.
Command Modes
Configuration mode.
Command History Release
3.1
Usage Guidelines None.
Examples
The following example enables one time authentication for SNMP over a TCP session.
switch# config t
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)# snmp-server tcp-session auth
Related Commands Command
show snmp
OL-18089-01, Cisco MDS NX-OS Release 4.x
snmp-server tcp-session [auth]
no snmp-server tcp-session [auth]
Modification
This command was introduced.
Description
Displays SNMP information.
(Optional) Enables one time authentication for SNMP over a TCP
session.
snmp-server tcp-session
Cisco MDS 9000 Family Command Reference
21-55