18.7 Securing Oscillation Stabilization Time
When the STOP mode is released, only the oscillation stabilization time set by the OSTS register
elapses. If the STOP mode has been released by RESET pin input, however, the reset value of the
OSTS register, 2
The timer for counting the oscillation stabilization time is shared with watchdog timer, so the oscillation
stabilization time equal to the overflow time of the watchdog timer elapses.
Figure 18-6 shows the operation performed when the STOP mode is released by an interrupt request.
Oscillated waveform
Software STOP
Interrupt request
Caution:
736
Downloaded from
Elcodis.com
electronic components distributor
Chapter 18 Standby Function
16
/f
elapses.
X
Figure 18-6: Oscillation Stabilization Time
Main clock
mode status
For details of the OSTS register, refer to 6.3 (7)"Oscillation stabilization time select
register (OSTS)" on page 241.
Main clock
Oscillation stabilization
oscillator stops
time count
User's Manual U16702EE3V2UD00