Chapter 4 Connectivity Management
4.2 Host Group Management
(6)
After adding or deleting iSCSI hosts is complete, click the [Modify] button.
A confirmation screen appears.
4
Click the [OK] button.
Modification of the iSCSI host group starts.
5
Click the [Done] button to return to the [Host Group] screen.
4.2.8
Modify Host Group (SAS)
This function performs the following modifications to the existing SAS host group.
•
Changing the "Host Group Name" settings
•
Changing the "Host Response" settings
•
Changing the "Host" settings (including addition and deletion of member hosts in a host group)
Hosts can be added to host groups which the host affinity setting has been already configured, or deleted
from host groups.
If a host is added, the host affinity setting is automatically configured to the host, as a host group member.
If a host is deleted, the host affinity setting is cleared from the corresponding host.
The number of hosts that can be registered
Model
ETERNUS DX60 S3
ETERNUS DX100 S3
ETERNUS DX200 S3
*1:
The total number of hosts irrespective of the interface types.
Number of hosts (HBAs)
(*1) per storage system
128
1024
399
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
Number of hosts (HBAs)
per CA port
32
256
End of procedure
Number of hosts (HBAs)
per host group
8
P2X0-1270-13ENZ0