Fujitsu ETERNUS DX60 S3 User Manual page 972

Appendix B Factory Default List
B.1 System Management
■ Modify Date and Time
Screen
Date/Time Settings
Time Zone Settings
Daylight Saving Time Settings
NTP Settings
■ Change Box ID
Screen
Set Box ID
Setting item
Date
Time Zone
Daylight Saving Time
Range
Start
End
Synchronize with NTP Server
Primary NTP Server
LAN Port used for NTP
Secondary NTP Server
LAN Port used for NTP
Setting item
Box ID
972
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
Default value
The current date and time that is specified in the
ETERNUS DX.
(When the ETERNUS DX is installed in Japan, the
local time for Japan is displayed)
•
When the ETERNUS DX is shipped from Japan
and shipped to Japan (GMT+09:00) Tokyo,
Osaka, Kyoto, Fukuoka, Sapporo
•
When the ETERNUS DX is shipped from Japan
to regions other than Japan (GMT+00:00)
Dublin, London, Manchester, Lisbon
The default value depends on the shipment
information.
•
When selecting "Manually" in the "Time Zone"
field
+00:00
Disable
By day of the week
•
When "Range" is "By day of the week"
January 1st Sunday 00 : 00
•
When "Range" is "By Date"
January 01 00 : 00
•
When "Range" is "By day of the week"
January 1st Sunday 00 : 00
•
When "Range" is "By Date"
January 01 00 : 00
Disable
MNT
MNT
Default value
Device ID
P2X0-1270-13ENZ0