Fujitsu ETERNUS DX60 S3 User Manual page 537

Chapter 5 RAID Group Management
5.3 Rename RAID Group
If an error screen appears under the following conditions, check the parameter settings.
• When new RAID group name is not input
• When the RAID group name does not satisfy the input conditions
• When inputting the existing RAID group name (when one RAID group is selected)
• When the "Start of Suffix" is not specified (when multiple RAID groups are selected)
• When the value in the "Start of Suffix" does not satisfy the input conditions (when multiple RAID
groups are selected)
3
Click the [Rename] button
 A confirmation screen appears.
4
Click the [OK] button.
 Changing RAID group name starts.
5
Click the [Done] button to return to the [RAID Group] screen.
537
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
End of procedure
P2X0-1270-13ENZ0