Appendix A Parameter List
A.4 Connectivity Management
•
Host Response
Description
Input condition/
Display contents
•
Checkbox to select a host
Description
Input condition/
Display contents
FC hosts that are set for the host affinity of which the Virtual Volume function is enabled are not displayed.
●
Host Setting
•
WWN
Description
Input condition/
Display contents
A.4.2.5
Modify Host Group (iSCSI)
For details about this function, refer to
●
Host Group Setting
•
Host Group Name
Description
Input condition/
Display contents
Select a host response that is to be assigned to a host group.
The host response list created in the ETERNUS DX is displayed.
•
Solaris MPxIO
•
HP-UX
•
AIX
•
AIX VxVM
•
VS850/SVC
•
BS2000
•
Host responses created in the ETERNUS DX
•
Default
Select the corresponding host checkbox in the FC host list, to add a host. Clear the
corresponding host checkbox in the FC host list, to delete a host.
Checkbox
•
Selected
•
Cleared
Input the WWN for the FC host.
•
Hexadecimal numbers (0 - 9, A - F, a - f)
•
16 digits ("F (f)" or "0" used in entire 16 digits are not allowed)
"4.2.7 Modify Host Group (iSCSI)" (page
Specify the host group name.
An existing host group name cannot be used. Refer to
hosts" (page 1053)
for details.
•
Up to 16 alphanumeric characters and symbols (except "," (comma) and "?")
•
Spaces
824
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
391).
"Naming conventions for adding
P2X0-1270-13ENZ0