Fujitsu ETERNUS DX60 S3 User Manual page 825

Appendix A Parameter List
A.4 Connectivity Management
• Host Response
Description
Input condition/
Display contents
• Checkbox to select a host
Description
Input condition/
Display contents
•
If the iSNS server has not been configured in
cannot be automatically acquired.
•
The following restrictions in the environment that is described below apply for the automatic acquirement of
host information (*1) even when the iSNS server is specified.
*1:
-
When one of the following OSs is used and there are multiple hosts that have the same iSCSI name but
different IP addresses, only the information of one host can be acquired.
•
•
•
•
-
When the host OS is Oracle Solaris 11, "IP Version" and "IP Address" cannot be acquired.
•
The following items can be specified only for the iSCSI hosts that are selected by checkboxes; "IP Version" "IP
Address", "Alias Name", "CHAP User ID", "Change CHAP Password", "CHAP Password", and "Confirm CHAP
Password".
iSCSI hosts that are set for the host affinity of which the Virtual Volume function is enabled are not displayed.
Select a host response that is to be assigned to a host group.
The host response list created in the ETERNUS DX is displayed.
•
Solaris MPxIO
•
HP-UX
•
AIX
•
AIX VxVM
•
VS850/SVC
•
BS2000
•
Host responses created in the ETERNUS DX
•
Default
Select the corresponding host checkbox in the iSCSI host list, to add a host. Clear the
corresponding host checkbox in the iSCSI host list, to delete a host.
Checkbox
•
Selected
•
Cleared
"iSCSI Name", "IP Version", "IP Address", and "Alias Name"
Windows Server 2003
Windows Server 2008
Windows Server 2008 R2
Oracle Solaris 10
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
"4.3.8 Modify iSCSI Port Parameters" (page
825
446), the iSCSI host
P2X0-1270-13ENZ0