Fujitsu ETERNUS DX60 S3 User Manual page 861

Appendix A Parameter List
A.4 Connectivity Management
●
Additional IP Address Information
• Additional IP Address Settings
- Multiple VLAN
Description
Input condition/
Display contents
•
This item is displayed when the port mode is "CA" or "CA/RA".
•
If the Multiple VLAN setting is changed to "Disable", all of the added IP address information is deleted.
When the port mode is "CA" or "CA/RA" and Multiple VLAN is enabled, multiple IP address information
can be specified.
- VLAN ID
Description
Input condition/
Display contents
- IP Version
Description
Input condition/
Display contents
Select whether to "Enable" or "Disable" the Multiple VLAN settings for the target port.
When the Multiple VLAN setting is enabled, multiple IP addresses can be specified
for a single iSCSI-CA port. This enables concurrent connection to multiple hosts that
belong to different VLANs via a single iSCSI-CA port.
•
Enable
•
Disable
Select whether to "Enable" or "Disable" the VLAN ID for IP#n (n: 1 - 15).
When "Enable" is selected, input the VLAN ID.
•
Enable
Specify the VLAN ID between 0 and 4095
•
Disable
Select the IP version for IP#n (n: 1 - 15).
•
IPv4
Specify the IPv4 address. When "IPv4" is selected, input "IP Address" (required),
"Subnet Mask" (required), and "Gateway".
•
IPv6
Specify the IPv6 address. When "IPv6" is selected, input "IPv6 Connect ID Address"
(required), "IPv6 Global Address", and "IPv6 Gateway".
•
IPv4/IPv6
Specify both the IPv4 address and the IPv6 address. The input items for IPv4 and
IPv6 can be specified.
861
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0