Fujitsu ETERNUS DX60 S3 User Manual page 869

Appendix A Parameter List
A.4 Connectivity Management
●
LUN Setting
• Start Host LUNs
Description
Input condition/
Display contents
• Number of LUNs
Description
Input condition/
Display contents
• Select Volume
Description
Input condition/
Display contents
•
If any volumes that cannot be used for allocation exist within the range specified by the LUN number, these
volumes are skipped and the next volume is allocated.
•
Volumes that have already been registered in relevant LUN groups are not displayed.
A.4.4.2 Modify LUN Group
For details about this function, refer to
●
LUN Group Setting
• Name
Description
Input condition/
Display contents
●
Define LUN Group
Refer to "Define LUN Group" (page 868)
Specify the LUN from which allocation is to be started.
The smallest LUN among the available LUNs.
0 - 4095 (decimal)
The number of LUNs, to which the volumes are allocated, is displayed.
1 - 4096 (decimal)
Select the volume number from which allocation is to be started.
Volume number from which allocation is to be started
"4.4.3 Modify LUN Group" (page
Modify the LUN group name.
An existing LUN group name cannot be specified.
•
Up to 16 alphanumeric characters and symbols (except "," (comma) and "?")
•
Spaces
in "Add LUN Group" (page 868)
869
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
467).
for details.
P2X0-1270-13ENZ0