Chapter 4 Connectivity Management
4.2 Host Group Management
•
When a host was added to a host group, of which the host affinity setting has been configured, paths
between all the ports with the host affinity setting and the added host will be configured. To modify the
path between a host and a port, refer to
•
When a host in the host group for which the host affinity settings are already configured is deleted, the
path from the host to the port is also deleted.
•
To change the host name or WWN, use the procedure in
•
To create a new host group and register hosts, use the procedure in
365).
•
An FC host and an FCoE host can be members of the same host group. Both "FC host" and "FCoE host" are
abbreviated as "FC host" in this section.
For details on the parameters for this function, refer to
The procedure to modify an FC host group is as follows:
Procedure
1
Select the FC host group to be changed, and click [Modify Host Group] in [Action].
2
Input a new host group name, or re-select a host response to be assigned to the host group.
The main setting items are as follows.
●
Host Group Setting
•
Host Group Name
•
Host Response
"4.1.3 Modify Host Affinity" (page
387
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
351).
"4.2.15 Modify FC/FCoE Host" (page
"4.2.1 Add FC/FCoE Host Group" (page
"A.4.2.4 Modify Host Group (FC/FCoE)" (page
423).
823).
P2X0-1270-13ENZ0