Set Rec Bandwidth Limit - Fujitsu ETERNUS DX60 S3 User Manual

Chapter 7 Advanced Copy Management
7.8 REC Management
7.8.12

Set REC Bandwidth Limit

This function sets the bandwidth limit for the Remote Copy path.
Registering the Advanced Copy function license or the Storage Cluster function license (*1) is required to use
this function.
*1: The Storage Cluster function license must be registered using ETERNUS SF Storage Cruiser.
• This function enables the Initiator (copy source) to limit the bandwidth for sending data in the copy path.
The bandwidth limit can be set for each path.
• The bandwidth limit setting is not included in the copy path information. Therefore, a bandwidth limit
setting for the unchanged path remains even when a copy path was created after the copy path informa-
tion had been changed.
• The bandwidth limit for the path is also deleted when the copy path has been deleted.
For details on the parameters for this function, refer to
For the factory default settings for this function, refer to
The procedure to set the REC bandwidth is as follows:
Procedure
1
Select the remote storage system to set the bandwidth limit, and click [Set REC Bandwidth
Limit] in [Action].
2
Set the detailed bandwidth limit information.
658
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
"A.7.10 Set REC Bandwidth Limit" (page
"Appendix B Set REC Bandwidth Limit" (page
965).
1012).
P2X0-1270-13ENZ0