Fujitsu ETERNUS DX60 S3 User Manual page 615

Chapter 7 Advanced Copy Management
7.8 REC Management
The procedure to set an REC copy path is as follows:
Operation Mode Selection
In this screen, select the operation mode.
Procedure
1
Click [Set Copy Path] in [Action].
2
Select the operation mode.
The main setting item is as follows.
●
Operation Mode Selection
• Operation Mode
3
Click the [Next >>] button.
The displayed screen is different depending on the selected operation.
■ When selecting "Create Copy Path"
The [Base Information Selection] screen appears. Proceed to
(Register)" (page
■ When selecting "Apply Copy Path"
The [Copy Path Information File Selection] screen appears. Proceed to
(page 625).
616).
615
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
"Register Storage System Information
"Select Copy Path Information"
End of procedure
P2X0-1270-13ENZ0