Appendix A Parameter List
A.5 RAID Group Management
•
Fast Recovery Configuration
Description
Input condition/
Display contents
•
RAID Group Capacity
Description
Input condition/
Display contents
●
Drive Selection ([Tabular] tab)
•
Checkbox to select drives
Description
Input condition/
Display contents
Select the drive configuration for a Fast Recovery RAID group.
Select the drive configuration from "No. of drives in the configuration", "capacity
efficiency", and "rebuilding speed" according to your environment. Refer to
configuration for Fast Recovery RAID groups" (page 910)
sets there are, the faster the rebuilding becomes. This item is blank when the RAID level
is not "High Reliability (RAID6-FR)".
•
ETERNUS DX60 S3
-
(3D+2P)x2+1HS
-
(6D+2P)x2+1HS
-
(9D+2P)x2+1HS
-
Blank
•
Other than the ETERNUS DX60 S3
-
(3D+2P)x2+1HS
-
(4D+2P)x2+1HS
-
(6D+2P)x2+1HS
-
(9D+2P)x2+1HS
-
(12D+2P)x2+1HS
-
(5D+2P)x4+1HS
-
(13D+2P)x2+1HS
-
(8D+2P)x3+1HS
-
(4D+2P)x5+1HS
-
(3D+2P)x6+1HS
-
Blank
D: Data drives, P: Parity drives, HS: Hot Spares
The RAID group capacity is displayed.
The "RAID Group Capacity" is automatically calculated from the selected RAID level and
drives.
Capacity of RAID group that is to be created
Select the checkbox for the drive to be selected.
Checkbox
•
Selected
•
Cleared
907
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
"Drive
for details. The more redundant
P2X0-1270-13ENZ0