Setup Firewall - Fujitsu ETERNUS DX60 S3 User Manual

Disk storage systems
Hide thumbs Also See for ETERNUS DX60 S3:
Table of Contents

Advertisement

Chapter 1 System Management
1.8 Network Management
1.8.2

Setup Firewall

This function configures a firewall for each service.
Configuration is required for each MNT, RMT and FST port.
MNT port
The MNT port is used for general communication between the ETERNUS DX and the external hosts.
RMT port
The RMT port is used when the line must be separated from the MNT port.
For the ETERNUS DX60 S3/DX100 S3/DX200 S3 and the ETERNUS DX200F, this port is also used for
maintenance of the ETERNUS DX.
FST port
The FST port is used for maintaining the ETERNUS DX.
For the ETERNUS DX500 S3/DX600 S3 and the ETERNUS DX8700 S3/DX8900 S3, this port must be
configured.
If both the HTTP connection and the HTTPS connection have been disabled, ETERNUS Web GUI cannot
access the ETERNUS DX.
If both the Telnet connection and the SSH connection have been disabled, ETERNUS CLI cannot access the
ETERNUS DX.
If ports of all the services are disabled, access to the ETERNUS DX is not allowed.
When the firewall setting is changed, it takes approximately 10 seconds to update the storage system
information. To display the most recently updated screen, wait at least 10 seconds and click the [
in the [Network] screen or click [Network] in the category.
To configure the network environment of the ETERNUS DX, use the procedure in
Environment" (page
The following table shows the protocols, the port numbers, and the direction for each service.
ETERNUS Web GUI
ETERNUS CLI
Maintenance-Secure
(excluding SNMP trap)
ETERNUS DX Discovery
*1:
The direction of the first communication. "From" indicates that the first communication is performed from an
external server or an external client to the ETERNUS DX.
97).
Service
Protocol
HTTP
HTTPS
Telnet
SSH
Ping
ICMP
Unique protocol
SNMP
SNMP
RCIL
IPMI
Unique protocol
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
tcp/udp
Port number
tcp
tcp
tcp
1372
udp
udp
udp
9686
109
"1.8.1 Setup Network
Direction (*1)
80
from
443
from
23
from
22
from
from
from
161
from
623
from
from
P2X0-1270-13ENZ0
] icon

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents