Register Ssl Certificate - Fujitsu ETERNUS DX60 S3 User Manual

Chapter 1 System Management
1.8 Network Management
1.8.17

Register SSL Certificate

This function registers the SSL server key, which was downloaded by using the [Create Key/CSR] function, and
the SSL server certificate which was acquired from the certification authority.
• The HTTPS connection from ETERNUS Web GUI is disabled in the factory settings.
• There are two types of SSL certificate formats: the "SSL server certificate" and the "self-signed SSL
certificate". The "SSL server certificate" is registered by using this function and the "self-signed SSL
certificate" is created by using the procedure in
Register one of the certificates in the ETERNUS DX when using the HTTPS connection.
• To obtain the "SSL server certificate", the Certificate Signing Request (CSR) that is downloaded using the
procedure in
• Register the SSL server key and the SSL server certificate as a pair in the ETERNUS DX. If the combination
of the SSL server key and the SSL server certificate is incorrect, accessing from ETERNUS Web GUI via the
HTTPS connection is not possible.
• After the SSL server key and the SSL server certificate have been created, the information must be
updated in the storage system before accessing from ETERNUS Web GUI via the HTTPS connection. Log
out from ETERNUS Web GUI and wait a few minutes before logging in again.
• When the SSL server key and the SSL server certificate have been registered in the ETERNUS DX, the
setting PC, which has accessed from ETERNUS Web GUI via the HTTPS connection, will be forced to
disconnect.
For details on the parameters for this function, refer to
The procedures to create SSL server key and the SSL server certificate are as follows:
Procedure
1
Click [Register SSL Certificate] in [Action].
The SSL server key downloaded using the procedure in
"SSL server certificate" acquired from the certification authority are required before this action.
"1.8.16 Create Key/CSR" (page 137)
140
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
"1.8.15 Create Self-signed SSL Certificate" (page
must be send to the certification authority.
"A.1.7.15 Register SSL Certificate" (page
"1.8.16 Create Key/CSR" (page 137)
135).
725).
and the
P2X0-1270-13ENZ0