Fujitsu ETERNUS DX60 S3 User Manual page 531

Chapter 5 RAID Group Management
5.1 Create RAID Group
●
Automatic Setting
• Number of RAID Group
• Drive Type
• RAID Level
• Select Drives
• RAID Group Capacity
• When using SSDs, the SSD types (SSD-M/SSD) cannot be specified. SSDs that are the same type
and have the necessary capacity are selected. If SSDs with the same type are not available, RAID
groups cannot be created. Note that if multiple RAID groups are created at once, different SSD
types may be used for each RAID group. SSD types have no order of priority.
• When SSD-Ms with an interface speed of 12Gbit/s are installed in a high-density drive enclosure,
the SSDs operate at 6Gbit/s because the interface speed of the high-density drive enclosure is
6Gbit/s. When 12Gbit/s SSD-Ms are installed in the high-density drive enclosure, select the drives
manually. If drives are automatically selected from SSDs that are from the high-density drive
enclosures, or from both the high-density drive enclosures and other drive enclosures, all SSDs
operate at 6Gbit/s.
• If "High Performance (RAID1+0)", "High Capacity (RAID5)", or "Reliability (RAID5+0)" is selected for
the RAID level, RAID groups cannot be created with drives that are 6TB or larger (except SSDs and
SSD SEDs).
• If an error screen appears under the following conditions, check the parameter settings.
-
-
-
4
Click the [Create] button
 A confirmation screen appears.
5
Click the [OK] button.
 RAID group creation starts.
6
Click the [Done] button to return to the [RAID Group] screen.
The name overlaps with an existing volume name for "Name"
The "Name" does not satisfy the input conditions
RAID groups cannot be created by using the drives that are installed in the ETERNUS DX
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
531
End of procedure
P2X0-1270-13ENZ0