Fujitsu ETERNUS DX60 S3 User Manual page 807

Appendix A Parameter List
A.3 Volume Management
• Number of Member Drives
Description
Input condition/
Display contents
• Stripe Depth
Description
Input condition/
Display contents
●
Select RAID Groups
• Checkbox to select RAID groups
Description
Input condition/
Display contents
Select the number of member drives that configure the RAID groups in the migration
destination WSV.
The selectable number of member drives, which is determined by the specified RAID
level, is displayed.
If there are no RAID groups in which volumes can be created, the field is blank.
•
For High Performance (RAID1+0)
4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30, 32
•
For High Capacity (RAID5)
3 - 16
•
For High Reliability (RAID6)
5 - 16
•
For Reliability (RAID5+0)
6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30, 32
•
For Mirroring (RAID1)
2
•
For Striping (RAID0)
2 - 16
Select the Stripe Depth of the drives that configure the RAID groups in the migration
destination WSV.
The selectable Stripe Depth varies depending on the specified RAID level. Refer to
"Available Stripe Depth value (for RAID group)" (page 913)
If "Mirroring (RAID1)" is selected as the RAID level, a "-" (hyphen) is displayed.
If there are no RAID groups in which volumes can be created, the field is blank.
•
64 KB
•
128 KB
•
256 KB
•
512 KB
•
1024 KB
Select the checkbox for the RAID group to be selected.
Checkbox
•
Selected
•
Cleared
807
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
for details.
P2X0-1270-13ENZ0