Fujitsu ETERNUS DX60 S3 User Manual page 371

Chapter 4 Connectivity Management
4.2 Host Group Management
The following table shows the host response after new hosts are added.
Host group (Host response)
Host_G1 (HR_1)
Host_G2 (HR_1)
Host_G3 (HR_1)
■
Example of changing the host response when adding a host to an existing host group
Host group (Host response)
Host_G1 (Default)
Host_G2 (Default)
Host_G3 (HR_1)
When a host "Host_3" is added to the existing host group "Host_G3" (host response: HR_1), the host response
is changed as follows:
1. The host response for Host-3 is changed from "Default" to "HR_1" (the host response for Host_G3).
2. Since the host response for Host-3 is changed, the host response for Host_G2 to which Host-3 belongs is also
changed from "Default" to "HR_1".
(The host response for Host_2, which is the member host of Host_G2, is changed from "Default" to "HR_1".)
3. Since the host response for Host-2 is changed, the host response for Host_G1 to which Host-2 belongs is also
changed from "Default" to "HR_1".
(The host response for Host_1, which is the member host of Host_G1, is changed from "Default" to "HR_1".)
The following table shows the host response after new hosts are added.
Host group (Host response)
Host_G1 (HR_1)
Host_G2 (HR_1)
Host_G3 (HR_1)
Member host
Host-1
Host-2
Host-2
Host-3
Host-3
Host-4
Member host
Host-1
Host-2
Host-2
Host-3
Host-4
Member host
Host-1
Host-2
Host-2
Host-3
Host-3
Host-4
371
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
Host response that is allocated to the host
HR_1
HR_1
HR_1
HR_1
HR_1
HR_1
Host response that is allocated to the host
Default
Default
Default
Default
HR_1
Host response that is allocated to the host
HR_1
HR_1
HR_1
HR_1
HR_1
HR_1
P2X0-1270-13ENZ0