Fujitsu ETERNUS DX60 S3 User Manual page 834

Appendix A Parameter List
A.4 Connectivity Management
• Host Response
Description
Input condition/
Display contents
■ When registering a host by manually specifying the host
●
Host Setting
• SAS Address
Description
Input condition/
Display contents
For setting items, refer to
(page 833).
A.4.2.10 Modify FC/FCoE Host
For details about this function, refer to
●
FC/FCoE Host Setting
• Name
Description
Input condition/
Display contents
• WWN
Description
Input condition/
Display contents
Select a host response to be assigned to a SAS host.
The host response list created in the ETERNUS DX is displayed.
•
Solaris MPxIO
•
HP-UX
•
AIX
•
AIX VxVM
•
VS850/SVC
•
BS2000
•
Host responses created in the ETERNUS DX
•
Default
Input the SAS address for the SAS host.
•
Hexadecimal numbers (0 - 9, A - F, a - f)
•
16 digits ("F (f)" or "0" used in entire 16 digits are not allowed)
"Host Setting" (page 833) in "When registering a host by selecting from the host list"
"4.2.15 Modify FC/FCoE Host" (page
Specify a new FC host name.
An existing host name cannot be specified.
•
Up to 16 alphanumeric characters and symbols (except "," (comma) and "?")
•
Spaces
Specify a new WWN.
The registered WWN cannot be used.
•
Hexadecimal numbers (0 - 9, A - F, a - f)
•
16 digits ("F (f)" or "0" used in entire 16 digits are not allowed)
834
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
423).
P2X0-1270-13ENZ0