Delete Ca Port Group; Modify Ca Port Group - Fujitsu ETERNUS DX60 S3 User Manual

Chapter 4 Connectivity Management
4.3 CA Port Group Management
4.3.5

Delete CA Port Group

This function deletes a CA port group.
CA port groups that are being used for the host affinity settings cannot be deleted.
The procedure to delete a CA port group is as follows:
Procedure
1
Select the CA port group to be deleted (multiple selections can be made) and click [Delete
Port Group] in [Action].
 A confirmation screen appears.
The CA port group, of which host affinity settings have been configured (the status of the port group is
"Active"), cannot be deleted.
2
Click the [OK] button.
 Deletion of the CA port group starts.
3
Click the [Done] button to return to the [CA Port Group] screen.
4.3.6

Modify CA Port Group

This function performs the following modifications for existing CA port groups:
• CA Port Group Name
• Port (Add and delete member ports in a CA port group)
Ports can be added to CA port groups for which the host affinity setting is already configured and ports can
also be deleted from CA port groups.
If a port has been added, the host affinity setting is automatically configured to the corresponding port as a
CA port group member.
If a port has been deleted, the host affinity setting is cleared from the corresponding port.
438
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
End of procedure
P2X0-1270-13ENZ0