Fujitsu ETERNUS DX60 S3 User Manual page 954

Appendix A Parameter List
A.7 Advanced Copy Management
●
Remote Device Information
• Checkbox to select the measuring target
Description
Input condition/
Display contents
Specification for applying result
Comparison result (*1)
The Box ID information
exists in both storage
systems
The Box ID exists only in the created path
information
The Box ID information exists only in the path
information in the ETERNUS Disk storage system
*1: The comparison result between "created path information" and "path information in the ETERNUS Disk storage
system" is displayed.
*2: If the path information file is applied to the ETERNUS Disk storage system under this condition, the contents of the
path information in the ETERNUS Disk storage system and the backed up path information file do not match.
Select the checkbox of the remote storage system to measure the round trip time.
This checkbox is only displayed for the remote storage system of which connection type
is "Remote".
Checkbox
•
Selected
•
Cleared
information)
The path information is
Do not Change
the same
The path information is
Change
different
Add
Delete
954
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
Display item in the "Result of applying" field
Status of the checkbox for selecting a Box ID
Selected Cleared
(Apply the (Do not apply the
information)
Do not Change
Do not Change (*2)
Do not Add
Do not Change (*2)
Default
Do not Change
Change
Add
Do not Change
P2X0-1270-13ENZ0