Fujitsu ETERNUS DX60 S3 User Manual page 777

Appendix A Parameter List
A.1 System Management
• Change Password
Description
Input condition/
Display contents
• Authentication Password
Description
Input condition/
Display contents
• Confirm Password
Description
Input condition/
Display contents
A.1.12.6 Setup Remote Session Permission
For details about this function, refer to
For the factory default settings for this function, refer to
986).
●
Remote Session Permission Setting
• Remote Session
Description
Input condition/
Display contents
To change the proxy server authentication password, select the checkbox.
Checkbox
•
Selected
•
Cleared
Select the "Change Password" checkbox and then input the password for proxy server
authentication.
When inputting the password, "*" is displayed to hide the specified value.
If a proxy server is not used, this item does not need to be set.
Up to 64 alphanumeric characters and symbols
Select the "Change Password" checkbox and then input the password for proxy server
authentication again.
When inputting the password, "*" is displayed to hide the specified value.
If a proxy server is not used, this item does not need to be set.
Up to 64 alphanumeric characters and symbols
"1.14.2 Setup Remote Session Permission" (page
Select whether to "Permit" or "Forbid" a remote session from the AIS Connect server.
•
Permit
•
Forbid
777
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
"Appendix B Setup Remote Session Permission" (page
209).
P2X0-1270-13ENZ0