Fujitsu ETERNUS DX60 S3 User Manual page 866

Appendix A Parameter List
A.4 Connectivity Management
• Transfer Rate (Gbit/s)
Description
Input condition/
Display contents
• Set VLAN ID
Description
Input condition/
Display contents
• VLAN ID
Description
Input condition/
Display contents
• Set Fabric Name
Description
Input condition/
Display contents
• Fabric Name
Description
Input condition/
Display contents
Set the transfer speed of the target port.
10 Gbit/s
Specify "Automatic" to enable the automatic setting for the VLAN ID of the target port.
Specify "Fixed" to enable the fixed setting.
When "Automatic" is specified, VLAN ID is automatically obtained and no need to specify
the VLAN ID.
When "Fixed" is specified, input the VLAN ID.
•
Automatic
•
Fixed
Input the VLAN ID for the target port.
Make sure to set the same value for the VLAN ID as the VLAN ID of the FCoE switch that is
to be connected to.
0 - 4095
Specify "Automatic" to enable the automatic setting for the fabric name of the target
port. Specify "Fixed" to enable the fixed setting.
When "Automatic" is specified, the fabric name of the connected FCoE switch is
automatically obtained and does not need to be specified.
When "Fixed" is specified, input the fabric name.
"Automatic" should be set for normal operation. When "Fixed" is specified, connection to
any switch other than the specified FCoE switch cannot be performed.
•
Automatic
•
Fixed
Input the fabric name (WWN of FCoE) of the target port.
WWN of FCoE (16-digit hexadecimal)
866
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0