Appendix A Parameter List
A.7 Advanced Copy Management
A.7.5
Set Copy Path
For details about this function, refer to
For the factory default settings for this function, refer to
●
Operation Mode Selection
•
Operation Mode
Description
Input condition/
Display contents
●
Base Information Selection
•
Base Information
Description
Input condition/
Display contents
●
Copy Path Information File Selection
•
Copy path information file
Description
Input condition/
Display contents
●
Registered Storage System List
•
Checkboxes for selecting a storage system
Description
Input condition/
Display contents
"7.8.2 Set Copy Path" (page
Select the operation mode.
•
Create Copy Path
Create a copy path and apply to the ETERNUS DX.
•
Apply Copy Path
Apply the existing copy path information file to the ETERNUS DX.
Specify the registration method for storage system information.
•
Backup Path File
The copy path information file previously applied is used.
•
Path File
The copy path information file stored in the setting PC is used.
•
Not use
Copy path is newly created.
Input the location where the copy path information file is stored.
Click the [Browse...] button to specify the location, or input the location directly.
•
Click the [Browse...] button to specify the location
•
Directly input the location
A list of the storage system information specified in the copy path information file
previously applied or stored in the ETERNUS DX is displayed.
Select the ETERNUS Disk storage system to create a copy path.
Checkbox
•
Selected
•
Cleared
942
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
612).
"Appendix B Set Copy Path" (page
1010).
P2X0-1270-13ENZ0