Fujitsu ETERNUS DX60 S3 User Manual page 257

Chapter 3 Volume Management
3.1 Create Volume
• When the NAS user volume is created, three system volumes are automatically created per storage system
in the same TPP. The following NAS system volumes are created:
Volume name
$SYSVOL1
$SYSVOL2
$SYSVOL3
• Only one NAS user volume can be created at a time.
• NAS volumes are displayed as "TPV" in the volume list screen. TPVs for SAN and the NAS volumes (TPVs for
NAS) can be identified by "Usage" and "Usage Details". Refer to "Volume (Basic Information)" in "ETERNUS
Web GUI User's Guide (Operation)" for details.
• For details on the setting items according to the drive type that is used, refer to
volume type when selecting "Automatic"" (page 258)
selecting "Manual"" (page
Procedures for when the NAS volume creation is not completed successfully
When the NAS volume creation is not completed successfully, perform the following actions.
(1) Confirm that the general status (detail) of the ETERNUS DX and the status of the NAS Engine are both "
Normal". If the status is not "
The ETERNUS DX general status (detail) can be checked in the [Storage] screen. Refer to "Storage (Basic
Information)" in "ETERNUS Web GUI User's Guide (Operation)" for details.
The NAS Engine status can be checked in the [Internal Parts] tab of the [Controller Module Detail] screen.
Refer to "Controller Module Detail" in "ETERNUS Web GUI User's Guide (Operation)" for details.
(2) If the NAS user volume was created, delete the relevant volume. If the NAS user volume cannot be deleted,
the ETERNUS DX requires maintenance.
For the NAS user volume, "File" is displayed as the usage in the volume list screen ("NAS Data" is displayed
as the detailed usage of the volume detailed information screen). Refer to "Volume (Basic Information)"
and "Volume Detail (Basic)" in "ETERNUS Web GUI User's Guide (Operation)" for details.
(3) Create the NAS user volume again. Confirm that the volume creation was successfully completed.
Usage Usage Details
NAS FS Management
System NAS CM#0 System
NAS CM#1 System
259).
Normal", the ETERNUS DX requires maintenance.
257
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
1GB
8GB
8GB
"Setting items for each
or "Setting items for each volume type when
Capacity
P2X0-1270-13ENZ0