Fujitsu ETERNUS DX60 S3 User Manual page 121

Chapter 1 System Management
1.8 Network Management
For details on the parameters for this function, refer to
For the factory default settings for this function, refer to
981).
The procedure to set the SNMP Agent community is as follows:
Procedure
1
Click [Setup SNMP Community] in [Action].
2
When adding a community, click the [Add] button. Click the [Community Name] link to edit
the community.
To delete the existing community, click the [Delete] button for the target community.
 The [Setup SNMP Agent Community] screen appears.
121
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
"A.1.7.7 Setup SNMP Agent Community" (page
"Appendix B Setup SNMP Agent Community" (page
715).
P2X0-1270-13ENZ0