Fujitsu ETERNUS DX60 S3 User Manual page 367

Chapter 4 Connectivity Management
4.2 Host Group Management
3
Register a host in a host group in the following procedures.
■ When registering a host by selecting from the host list
(1)
Click the [Now Connected] tab.
(2)
Select a host that is to be registered from the FC host list.
The main setting item is as follows.
●
Host Group Setting
• Checkbox to select a host
Filter setting
WWN
Host Group
Host Response
Filter
Input the WWN that is to be displayed.
FC hosts matching or partially matching the input WWN are displayed.
When not using the WWN for filtering, leave this item blank.
Input the host group name that is to be displayed.
FC hosts which belong to any host groups that match or partially match the entered
name are displayed.
When not using the host group name for filtering, leave this item blank.
Select the host response that is to be displayed.
Any FC hosts that are allocated to the selected host response are displayed.
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
Description
367
P2X0-1270-13ENZ0