Fujitsu ETERNUS DX60 S3 User Manual page 184

Chapter 1 System Management
1.12 Storage Migration Management
-
-
-
-
• When an error is detected in the script analysis
• An error screen is displayed when the obtained destination storage system information is in the
following conditions:
-
-
-
-
-
3
Click the [Next >>] button.
The destination CA port being set for "PATH" is in the following conditions:
• The setting is not correct
• The mode is not "Initiator"
• The status is abnormal
• The same value is duplicated in the Storage Migration setting file
• The value is already used in a Storage Migration in execution.
• A CE number other than "CE0" is specified (for models other than the ETERNUS DX8700 S3/
DX8900 S3)
The source LUN is in the following conditions:
• Invalid characters are input
- The value is not a decimal or hexadecimal number
- The value is a decimal number that exceeds 256
- The value is not a 4-digit or 16-digit hexadecimal number
• The source LUN is used redundantly in the Storage Migration setting file
The destination volume is in the following conditions:
• Invalid characters are input
- The value is not a decimal or 4-digit hexadecimal number
• The volume number is out of range
• Not specified
• The status is abnormal
• The volume type is not "Standard", "WSV", "TPV", or "FTV"
• The destination volume is used redundantly in the Storage Migration setting file
• The destination volume is already used in a Storage Migration in execution
The source World Wide Name (WWN) being set for "PATH" is in the following conditions:
• The number of characters is not 16
• The value is out of range
• The first character is "0" or all characters are "F"
• The same value is duplicated in the Storage Migration setting file
Two or more source storage systems are specified in single "GROUP"
The source storage system has other Storage Migration instance already started
The source storage system status is not normal
The source WWN being set for "PATH" does not exist
The source LUN is in the following conditions:
• The source LUN does not exist.
• An unusable status is detected.
• The capacity exceeds that of the destination volume.
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
184
P2X0-1270-13ENZ0