Stop Snapshot - Fujitsu ETERNUS DX60 S3 User Manual

Chapter 3 Volume Management
3.19 Snapshot Management for NAS Volumes
3.19.4

Stop Snapshot

This function suspends the Snapshot acquisition.
The Snapshot that is being stopped cannot be acquired, but Snapshots that have already been acquired
before stopping the schedule are saved.
This function is displayed in a Unified Storage environment.
• This function stops Snapshots (SnapOPC+ sessions for all generations).
• After stopping the process, the Snapshot process can be restarted. Refer to
333) for details.
The procedure to suspend the Snapshot acquisition is as follows:
Procedure
1
Select which NAS user volumes to stop Snapshot for (multiple selections can be made) and
click [Stop Snapshot] in [Action].
 A confirmation screen appears.
2
Click the [OK] button.
 The Snapshot stops.
3
Click the [Done] button to return to the [Snapshot] screen.
334
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
"3.19.3 Start Snapshot" (page
End of procedure
P2X0-1270-13ENZ0