Fujitsu ETERNUS DX60 S3 User Manual page 709

Appendix A Parameter List
A.1 System Management
• Telnet
Description
• SSH
Description
• ICMP
Description
• Maintenance-Secure
Description
• SNMP
Description
• RCIL
Description
• ETERNUS DX Discovery
Description
Specify whether to enable or disable the Telnet connection.
Telnet is used when accessing from ETERNUS CLI.
Specify whether to enable or disable the SSH connection.
Secure Shell (SSH) is used when accessing from ETERNUS CLI. This connection uses the
data encryption for data transferring.
Specify whether to enable or disable the ICMP connection.
The Internet Control Message Protocol (ICMP) is used when sending the "ping" command
from a PC.
Specify whether to enable or disable the Maintenance-Secure connection.
Maintenance-Secure is used when connecting with the monitoring software, or
performing a firmware update from the peer storage system using the Remote Support
function. This connection uses the data encryption for data transferring.
Specify whether to enable or disable the SNMP connection.
The Simple Network Management Protocol (SNMP) is used when accessing from SNMP
Agent Manager.
Specify whether to enable or disable the Remote Cabinet Interface over LAN (RCIL)
connection.
Whether to enable or disable RCIL can only be set for the MNT port. The Remote Cabinet
Interface (RCIL) controls the power of the ETERNUS DX from a host via Ethernet by using
the Intelligent Platform Management Interface (IPMI), which is a general protocol.
Specify whether to enable or disable the ETERNUS DX Discovery connection.
Whether to enable or disable this parameter can only be set for the MNT port. The
ETERNUS DX Discovery is a port to connect ETERNUS DX storage systems in the network
by using the Remote Installation function.
709
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0