Fujitsu ETERNUS DX60 S3 User Manual page 828

Appendix A Parameter List
A.4 Connectivity Management
●
Host Setting
• iSCSI Name
Description
Input condition/
Display contents
A.4.2.6 Modify Host Group (SAS)
For details about this function, refer to
●
Host Group Setting
• Host Group Name
Description
Input condition/
Display contents
• Host Response
Description
Input condition/
Display contents
• Checkbox to select a host
Description
Input condition/
Display contents
Input the iSCSI name of the iSCSI host (required).
•
4 - 223 alphanumeric characters and symbols ('-', '.', ':')
•
The name starts with "iqn." or "eui."
"4.2.8 Modify Host Group (SAS)" (page
Specify the host group name.
An existing host group name cannot be used. Refer to
hosts" (page 1053) for details.
•
Up to 16 alphanumeric characters and symbols (except "," (comma) and "?")
•
Spaces
Select a host response that is to be assigned to a host group.
The host response list created in the ETERNUS DX is displayed.
•
Solaris MPxIO
•
HP-UX
•
AIX
•
AIX VxVM
•
VS850/SVC
•
BS2000
•
Host responses created in the ETERNUS DX
•
Default
Select the corresponding host checkbox in the SAS host list, to add a host. Clear the
corresponding host checkbox in the SAS host list, to delete a host.
Checkbox
•
Selected
•
Cleared
828
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
399).
"Naming conventions for adding
P2X0-1270-13ENZ0