Appendix A Parameter List
A.1 System Management
•
Set management unit interface
Description
Input condition/
Display contents
•
Power Failure Signal
Description
Input condition/
Display contents
•
Low Battery Signal
Description
Input condition/
Display contents
Select the external input device connected via RS232C interface.
For the ETERNUS DX60 S3/DX100 S3/DX200 S3, the ETERNUS DX500 S3/DX600 S3, and
the ETERNUS DX200F, the "Manual" setting is for particular use, thus should not be used
during normal operation.
•
For the ETERNUS DX8700 S3/DX8900 S3
-
Power Synchronized Unit
-
Manual
•
For the ETERNUS DX60 S3/DX100 S3/DX200 S3, the ETERNUS DX500 S3/DX600 S3,
and the ETERNUS DX200F
-
Power Synchronized Unit
-
PMAN
-
Manual
Select the signal logic for power failure signal when the power failure occurs.
When "Power Synchronized Unit" or "PMAN" is selected for the "Set management unit
interface" field, this item is automatically set.
•
Positive
Positive logic
•
Negative
Negative logic
Select the signal logic for a low battery signal when a low battery charge occurs.
When "Power Synchronized Unit" or "PMAN" is selected for the "Set management unit
interface" field, this item is automatically set.
•
Positive
Positive logic
•
Negative
Negative logic
680
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
P2X0-1270-13ENZ0