Fujitsu ETERNUS DX60 S3 User Manual page 699

Appendix A Parameter List
A.1 System Management
●
Primary Server (required) / Secondary Server
• Domain Name / IP Address
Description
Input condition/
Display contents
• Port No.
Description
Input condition/
Display contents
• LAN Port
Description
Input condition/
Display contents
• Authentication Mode
Description
Input condition/
Display contents
• Shared Secret
Description
Input condition/
Display contents
Input the domain name or the IP address of the RADIUS server.
There are two methods to specify an IP address; "IPv4" and "IPv6". The following IPv6
addresses can be used; "link local address", "global address", "unique local address", or
"6to4 address". Refer to "Available IPv6 Address" (page 107)
current setting is displayed, the IPv6 address is displayed as an abbreviation.
•
For IPv4 address
xxx.xxx.xxx.xxx
xxx: 1 - 255 for the top field (decimal)
xxx: 0 - 255 for other fields (decimal)
•
For IPv6 address
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx
xxxx: 0 - ffff (FFFF) (hexadecimal, alphanumeric characters)
Refer to "IPv6 Address Notation" (page 378)
•
For domain name
Up to 63 alphanumeric characters and symbols
Input the port number that is used for RADIUS Authentication.
•
Numeric characters
•
1 - 65535
Input the LAN port number that is used for RADIUS Authentication.
•
MNT
•
RMT
Select the authentication mode for RADIUS Authentication.
•
CHAP
•
PAP
Input the same Shared Secret as the RADIUS server.
Up to 64 alphanumeric characters and symbols
699
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
for details. When the
for details.
P2X0-1270-13ENZ0