Fujitsu ETERNUS DX60 S3 User Manual page 33

Chapter 1 System Management
1.4 System Management
2
Specify the parameters.
The main setting items are as follows.
●
Set the Name of this Storage System
• Name
• Installation Location
• Administrator
• Description
If an error screen appears under the following conditions, check the parameter settings.
• The "Name" is not entered
• A parameter does not satisfy the input conditions exists
3
Click the [Set] button.
 A confirmation screen appears.
4
Click the [OK] button.
 Setting of the storage system name starts.
5
Click the [Done] button to return to the [System Settings] screen.
33
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
End of procedure
P2X0-1270-13ENZ0