Fujitsu ETERNUS DX60 S3 User Manual page 317

Chapter 3 Volume Management
3.14 Modify Cache Parameters
For details on the parameters for this function, refer to
For the factory default settings for this function, refer to
The procedure to modify cache parameters is as follows:
Procedure
1
Select which volume to change the cache parameters for (multiple selections can be made)
and click [Modify Cache Parameters] in [Action].
2
Change the cache parameters.
Refer to
which the parameters can be specified.
If the [Default] button is clicked before the [Modify] button, the default cache parameters are
restored.
If EXCP for the ETERNUS DX is enabled and the general status of the ETERNUS DX is "Not Ready", an
error screen appears. Check the parameter settings.
3
Click the [Modify] button.
 A confirmation screen appears.
4
Click the [OK] button.
 The cache parameter modification starts.
5
Click the [Done] button to return to the screen when starting this function in
"Volume types for which Cache Parameters are available" (page 318)
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
"A.3.8 Modify Cache Parameters" (page
"Appendix B Modify Cache Parameters" (page
317
808).
990).
for the volume types for
Step 1.
End of procedure
P2X0-1270-13ENZ0