Fujitsu ETERNUS DX60 S3 User Manual page 849

Appendix A Parameter List
A.4 Connectivity Management
• TCP/IP Settings
- IP Version
Description
Input condition/
Display contents
This item is not displayed when the port type is "iSCSI RA (for older storage system connection)".
- IP Address
Description
Input condition/
Display contents
- Subnet Mask
Description
Input condition/
Display contents
- Gateway
Description
Input condition/
Display contents
Select the IP address version for the target port.
•
IPv4
Specify the IPv4 address. When "IPv4" is selected, input "IP Address" (required),
"Subnet Mask" (required), and "Gateway".
•
IPv6
Specify the IPv6 address. When "IPv6" is selected, input "IPv6 Connect ID Address"
(required), "IPv6 Global Address", and "IPv6 Gateway".
•
IPv4/IPv6
Specify both the IPv4 address and the IPv6 address. The input items for IPv4 and
IPv6 can be specified.
Input the IPv4 address of the target port (required when "IPv4" is selected).
Click the [Test Connection (ping)] button to display the [Send ping] screen. Specify
the IP address to check the connection status of the connection remote storage
system and the number of transmissions. Click the [Send] button. When the "ping"
command is sent, the settings of the IP address and the connection path for the
remote storage system can be checked.
•
Up to 3 numeric characters
•
First text box: "1" - "255"
•
Other text boxes: "0" - "255"
Input the subnet mask of the target port (required when "IPv4" is selected).
•
Up to 3 numeric characters
•
255.0.0.0 - 255.255.255.252
Input the gateway IP address of the target port when "IPv4" is selected.
•
Up to 3 numeric characters
•
All text boxes: "0" - "255"
849
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0