Figure 2.15 Host Interface (Sas) - Fujitsu ETERNUS DX80 S2 User's Manual & Installation Instructions

Chapter 2 Components
2.1 Controller Enclosure
●
SAS

Figure 2.15 Host interface (SAS)

SAS
Installed host interfaces in the controller
Host interface (CA#0)
• Part explanation
- Host interface ports (SAS) (from left to right: Port#0 and Port#1 in CA#0, Port#0 and Port#1 in CA#1)
These are the SFF-8088 connectors to connect miniSAS cables.
■ System Capacitor Unit (SCU)
A SCU is installed in a controller as a backup power source in case of power outage.
The SCU is charged from an external power source while the ETERNUS DX Disk storage system is running
normally. If a power outage is detected, data in the cache memory is saved to a non-volatile memory in the
controller using the SCU. The saved data is retained in the non-volatile memory indefinitely.
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Installation-
Port#0 Port#1
Copyright 2013 FUJITSU LIMITED
Port#0 Port#1
Host interface (CA#1)
36
P3AM-4832-07ENZ0