Fujitsu ETERNUS DX60 S3 User Manual page 779

Appendix A Parameter List
A.1 System Management
●
Schedule Settings
• Apply Date
Description
Input condition/
Display contents
When "Set Date" is selected, the reservation may be automatically canceled if the storage system status before or at
the specified time does not allow the application to be performed. Refer to
Schedule" (page 224)
●
Apply Mode Check
• Apply Mode
Description
Input condition/
Display contents
Select which application method is used for the controller firmware archive.
•
Apply Now
Start application of the controller firmware immediately.
•
Set Date
Set the date and time to start application of the controller firmware.
YYYY-MM-DD hh:mm (YYYY: 2001 - 2037, MM: 01 - 12, DD: 01- 31, hh: 00 - 23, mm:
00 or 30)
for details.
Select whether to allow the application of a controller firmware that is older than the
current one.
To allow the application of an older controller firmware, select the "Permit firmware
downgrade" checkbox and then click the [Apply] button. This checkbox is only displayed
when applying an older controller firmware.
"Permit firmware downgrade" checkbox
•
Selected
•
Cleared
779
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
"1.15.2 Delete Controller Firmware
P2X0-1270-13ENZ0