Fujitsu ETERNUS DX60 S3 User Manual page 700

Appendix A Parameter List
A.1 System Management
• Retry Out Time
Description
Input condition/
Display contents
A.1.6.3 Add Role
For details about this function, refer to
For the factory default settings for this function, refer to
●
Role Setting
• Name
Description
Input condition/
Display contents
Select the total time (seconds) for waiting for a response from the RADIUS server.
The ETERNUS DX retries authentication during the specified time (seconds), and if there
is no response in the specific time, regards the situation as a network error.
•
10
•
20
•
30
•
40
•
50
•
60
"1.7.4 Add Role" (page
Input a role name.
The role name, which has previously been used (including the default role name),
cannot be used.
Up to 16 alphanumeric characters and symbols (except "," (comma) and "?")
700
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
92).
"Appendix B Add Role" (page 977).
P2X0-1270-13ENZ0