Fujitsu ETERNUS DX60 S3 User Manual page 171

Chapter 1 System Management
1.11 Key Management
2
Specify the parameters.
The main setting items are as follows.
●
Key Server Setting
• Domain Name / IP Address
• Port No.
• LAN Port
If an error screen appears under the following conditions, check the parameter settings.
• When each parameter fails to satisfy the input conditions
• When inputting a domain name or an IP address that is already used for another key server
• When the IP address that was input and the IP address of the LAN port (MNT or RMT) are the same
• When the IP address that was input and the network address for the LAN port (MNT or RMT) are
the same
3
Click the [Modify] button.
 A confirmation screen appears.
4
Click the [OK] button.
 Changing of the key server settings starts.
5
Click the [Done] button to return to the [Key Management] screen.
171
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
End of procedure
P2X0-1270-13ENZ0