Test Server Connectivity - Fujitsu ETERNUS DX60 S3 User Manual

Chapter 1 System Management
1.14 Remote Support Management (AIS Connect)
This function collects logs (including I/O Module logs) at the time when performing the [Send Log] function.
Log files are divided into 640MB increments and sent to the AIS Connect server.
The procedure to send log is as follows:
Procedure
1
Click [Send Log] in [Action].
 A confirmation screen appears.
2
Click the [OK] button.
 Sending log starts.
3
Click the [Done] button to return to the screen when starting this function in
1.14.4

Test Server Connectivity

This function checks the connection status between the ETERNUS DX and a remote server (AIS Connect server).
Checking the connection status is only available when "AIS Connect" is enabled. Refer to
Connect Environment" (page 206)
This function checks the connection status of the AIS Connect server by using the AIS Connect information in
the ETERNUS DX. After performing the procedure in
the [Test Server Connectivity] function to check the connection status.
for details.
"1.14.1 Setup AIS Connect Environment" (page
211
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
Step 1.
End of procedure
"1.14.1 Setup AIS
206), use
P2X0-1270-13ENZ0