Fujitsu ETERNUS DX60 S3 User Manual page 594

Chapter 7 Advanced Copy Management
7.1 Start SnapOPC+
4
Check the displayed contents, and click the [Start] button.
 A confirmation screen appears.
If an error screen appears under the following conditions, check the parameter settings.
• When the SnapOPC+ started in the copy source volume exceeds the maximum number of
generations per volume
• When the SnapOPC+ started in the copy source volume exceeds the maximum number of copy
sessions for the entire ETERNUS DX
5
Click the [OK] button.
 SnapOPC+ session starts.
6
Click the [Done] button to return to the [Advanced Copy] screen.
594
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
End of procedure
P2X0-1270-13ENZ0