Fujitsu ETERNUS DX60 S3 User Manual page 44

Chapter 1 System Management
1.4 System Management
2
Select the parameters.
The main setting item is as follows.
●
Set SMI-S
• SMI-S
Select whether to "Enable" or "Disable" the SMI-S function.
3
Click the [Set] button.
 A confirmation screen appears.
4
Click the [OK] button.
 The SMI-S setting is performed.
5
Click the [Done] button to return to the [System Settings] screen.
Reboot the ETERNUS DX to apply the new setting.
44
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
End of procedure
P2X0-1270-13ENZ0